ASEF First Year CBT Paper – Free Practice Set -06

0%
5

यह पेपर 2 घंटे का है 2 घंटे बाद पेपर अपने आप सबमिट हो जायेगा और आप चाहें तो 2 घंटे से पहले भी सबमिट कर सकते है|

सॉरी समय समाप्त हो गया|


Aeronautical Structure and Equipment Fitter CBT Paper First Year (Quiz -6)

इस पेपर में 75 प्रशन है जिसमे Trade Tehory  के 38 प्रशन, Workshop Calculation and Science के 06 प्रशन, Engineering Drawing के 06 प्रशन, Employability Skill  के 25 प्रशन , प्रत्येक प्रशन 2 मार्क्स का है और किसी प्रकार की नेगेटिव मार्किंग नहीं है|

1 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

1. What is the dimension of the Go-end of gauges? |
गेज के गो-एंड का आयाम क्या है?

2 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

2. What letter indicate for basic hole? |
मूल होल के लिए कौन सा लेटर इंगित होता है?

3 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

3. What is the term used to describe the rate of change of speed? |
चाल में परिवर्तन की दर का वर्णन करने के लिए किस शब्द का प्रयोग किया जाता है?

4 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

4. What type of hazards are wrong attitude, alcoholism and unskilled behaviour considered to be? | ग़लत रवैया, शराबखोरी और अकुशल व्यवहार को किस प्रकार का ख़तरा माना जाता है?

5 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

5. What happens to the flow velocity as the surface area of the flow tube decreases? |
जैसे-जैसे प्रवाह ट्यूब का सतह क्षेत्र घटता जाता है, प्रवाह वेग का क्या होता है?

6 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

6. where cones are located in the eye? |
आँख में कोन कहाँ स्थित होते हैं?

7 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

7. When does a metal possess the property of fusibility, causing it to melt? |
किसी धातु में गलनांक का गुण कब आता है, जिसके कारण वह पिघल जाती है?

8 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

8. What factors determine the recommended cutting speed for drilling? |
ड्रिलिंग के लिए अनुशंसित कटिंग स्पीड का निर्धारण कौन से कारक करते हैं?

9 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

9. Which of the following is the lower deviation of the hole? |
निम्नलिखित में से कौन सा होल का निचला विचलन है?

10 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

10. When the bend angle is between 0o and 115o, what is the sign of the bend allowance?
जब बेंड एंगल 0o और 115o के बीच होता है, तो बेंड अलाउंस का संकेत क्या होता है?

11 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

11. What is the purpose of smooth file ? |
स्मूथ फाइल का उद्देश्य क्या है ?

12 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

12. What is FOD? |
FOD क्या है?

13 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

13. What type of fit will be obtained when the tolerance zone of the pin is entirely above that of the hole in a pin and hole assembly? |
जब पिन का टॉलरेंस ज़ोन पिन और होल असेंबली में होल से पूरी तरह ऊपर हो तो किस प्रकार की फिट प्राप्त होगी?

14 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

14. What is likely to happen to the sheet if rivets are spaced too far from the edge? |
यदि रिवेट्स को किनारे से बहुत दूर रखा जाए तो शीट के साथ क्या होने की संभावना है?

15 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

15. Which of the following alloy is used in a making aircraft structure? |
निम्नलिखित में से किस मिश्र धातु का उपयोग एयरक्राफ्ट स्ट्रक्चर बनाने में किया जाता है?

16 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

16. What is the name of the part marked as 'X' shown in the figure? |
चित्र में दिखाए गए 'X' से चिह्नित भाग का नाम क्या है?

17 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

17. Which law is associated with lift? |
लिफ्ट का संबंध किस नियम से है?

18 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

18. What is the angle shown in the figure?
चित्र में कौन सा कोण दर्शाया गया है?

19 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

19. What is the name of the process? |
प्रक्रिया का नाम क्या है?

20 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

20. Which tap is used to start the thread? |
थ्रेड को चालू करने के लिए किस टैप का प्रयोग किया जाता है?

21 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

21. Where does ailerons are fitted in aircraft ? |
वायुयान में ऐलीरोन कहाँ लगाए जाते हैं?

22 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

22. What are forging, gas cutting, welding, soldering and brazing activities known as? | फोर्जिंग, गैस कटिंग, वेल्डिंग, सोल्डरिंग और ब्रेजिंग गतिविधियों को क्या कहा जाता है?

23 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

23. What should be used to strip the surface? |
सरफेस को साफ करने के लिए किसका उपयोग किया जाना चाहिए?

24 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

24. What are the 3 widely used materials for aeronautical rivets? |
एयरोनॉटिकल रिवेट्स के लिए व्यापक रूप से उपयोग की जाने वाली 3 मटेरियल्स क्या हैं?

25 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

25. What is CPR in first aid? |
प्राथमिक चिकित्सा में CPR क्या है?

26 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

26. How heat energy transferred from one object to another without direct contact? |
सीधे संपर्क के बिना ऊष्मा ऊर्जा एक वस्तु से दूसरी वस्तु में कैसे स्थानांतरित होती है?

27 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

27. What are cobalt alloy drill bits specifically designed for drilling? |
ड्रिलिंग के लिए विशेष रूप से डिज़ाइन किए गए कोबाल्ट मिश्र धातु ड्रिल बिट क्या हैं?

28 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

28. Which of the following operation can be done by same tool? |
निम्नलिखित में से कौन सा ऑपरेशन एक ही टूल द्वारा किया जा सकता है?

29 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

29. What type of fasteners are solid rivets? |
सॉलिड रिवेट किस प्रकार के फास्टनर हैं?

30 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

30. Which is the suitable method used to clean the file teeth are clogged? |
बंद फ़ाइल दांतों को साफ करने के लिए कौन सी उपयुक्त विधि का उपयोग किया जाता है?

31 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

31. Which process when a material is forced or compressed into a smaller area? |
जब किसी मटेरियल को एक छोटे क्षेत्र में फोर्स लगाया या कंप्रेस किया जाता है तो कौन सी प्रक्रिया होती है?

32 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

32. What is the purpose of a plug gauge? |
प्लग गेज का उद्देश्य क्या है?

33 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

33. Which tool is used to cut internal thread? |
आन्तरिक थ्रेड को काटने के लिए किस टूल का प्रयोग किया जाता है?

34 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

34. How is the radius of the bend related to the thickness of the material? |
बेंड की त्रिज्या मटेरियल की मोटाई से कैसे संबंधित है?

35 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

35. What is the part marked as 1 and 2? |
1 और 2 के रूप में चिह्नित भाग क्या है?

36 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

36. What is the type of measurement? |
मापन का प्रकार क्या है?

37 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

37. What is another name for tensile testing? |
टेंसाइल टेस्टिंग का दूसरा नाम क्या है?

38 / 75

Category: Aeronautical Structure and Equipment Fitter First Year CBT Paper (TT)

38. Which of the following is a measure of the amount of matter in an object? |
निम्नलिखित में से कौन किसी वस्तु में पदार्थ की मात्रा का माप है?

39 / 75

Category: Workshop Calculation and Science CBT Paper (I)

1. What is the perimeter of scalene. Triangle having sides of 40mm, 20mm and 28mm? | उस विषमभुज त्रिकोण का परिमाप क्‍या होगा, जिसकी भुजाओं की माप 40 मिमी, 20 मिमी व 28 मिमी है?

40 / 75

Category: Workshop Calculation and Science CBT Paper (I)

2. Which metal contains iron as a major content?|
इनमे से किस धातु में प्रमुख सामग्री के रूप में लोहा होता है?

41 / 75

Category: Workshop Calculation and Science CBT Paper (I)

3. What is the S.I unit of heat? |
ऊष्‍मा की एस.आई. इकाई क्‍या है?

42 / 75

Category: Workshop Calculation and Science CBT Paper (I)

4. What is the square root of 529?|
529 का वर्गमूल क्या है?

43 / 75

Category: Workshop Calculation and Science CBT Paper (I)

5. What is the area of a rectangle, whose length and breadth are 10cm and 8cm respectively? |
एक आयत का क्षेत्रफल क्‍या होगा, जिसकी लम्‍बाई एवं चौड़ाई क्रमश: 10 से.मी. एवं 8 से.मी. हैं?

44 / 75

Category: Workshop Calculation and Science CBT Paper (I)

6. What are the two classifications of system of units?/
इकाइयों की प्रणाली के दो प्रकार कोनसे हैं?

45 / 75

Category: Employability Skill CBT Paper (I)

1. You have greeted the customer. Choose which of the following statements you should use to complete the greeting.|
आपने ग्राहक को बधाई दी है। ग्रीटिंग को पूरा करने के लिए आपको निम्नलिखित में से किस कथन का उपयोग करना चाहिए चुनें।

46 / 75

Category: Employability Skill CBT Paper (I)

2. Which one is a Do’s in interview etiquette? |
इंटरव्यू एटिकेट में Do’s क्या है?

47 / 75

Category: Employability Skill CBT Paper (I)

3. Spread sheets are saved with extension___________ |
स्प्रेड शीट को ............ एक्सटेंशन के साथ सेव किया (सहेजा) जाता है l

48 / 75

Category: Employability Skill CBT Paper (I)

4. ________ is a brief statement about purpose and principles of the Constitution. |
.....संविधान के उद्देश्य और सिद्धांतों के बारे में संक्षिप्त विवरण है।

49 / 75

Category: Employability Skill CBT Paper (I)

5. The expansion of SIDO is………… |
SIDO का विस्तार ………

50 / 75

Category: Employability Skill CBT Paper (I)

6. RTI is _____/
RTI है….।

51 / 75

Category: Employability Skill CBT Paper (I)

7. The expansion of GDP is……………. |
GDP का विस्तार …………… है।

52 / 75

Category: Employability Skill CBT Paper (I)

8. Which one is the disadvantage of social networking sites? |
सोशल नेटवर्किंग साइट्स का नुकसान कौन सा है?

53 / 75

Category: Employability Skill CBT Paper (I)

9. Gender stereotypes can be _______ |
लिंग रूढ़िवादिता हो सकती है ………।

54 / 75

Category: Employability Skill CBT Paper (I)

10. Debit card will have how many digit numbers? |
डेबिट कार्ड में कितने अंकों की संख्या होगी?

55 / 75

Category: Employability Skill CBT Paper (I)

11. Which one of these phrases is not related to a telephone call? |
इनमें से कौन-सा वाक्यांश एक टेलीफोन कॉल से संबंधित नहीं है?

56 / 75

Category: Employability Skill CBT Paper (I)

12. Which one is considered to be a poor communication? |
किसको पुअर कम्यूनिकेशन माना जाता है?

57 / 75

Category: Employability Skill CBT Paper (I)

13. Where all deleted files will be stored? |
सभी डिलीट की गयी फ़ाइलें कहाँ स्टोर (संग्रहीत) की जाएंगी?

58 / 75

Category: Employability Skill CBT Paper (I)

14. Low level language is also called______.|
निम्न स्तर की भाषा को ______ भी कहा जाता है

59 / 75

Category: Employability Skill CBT Paper (I)

15. Which one is in passive voice? |
निष्क्रिय आवाज में कौन सा है?

60 / 75

Category: Employability Skill CBT Paper (I)

16. When someone says 'Thank you' we should reply and say ______./
जब कोई 'Thank you (धन्यवाद)' कहता है तो हमें जवाब देना चाहिए और ______ कहना चाहिए।

61 / 75

Category: Employability Skill CBT Paper (I)

17. Which among these are not good manners while travelling by public transport? |
इनमें से कौन सा सार्वजनिक परिवहन से यात्रा करते समय अच्छे शिष्टाचार नहीं हैं?

62 / 75

Category: Employability Skill CBT Paper (I)

18. When is capital letter used? |
बड़े अक्षर का प्रयोग कब किया जाता है?

63 / 75

Category: Employability Skill CBT Paper (I)

19. A person with a growth mindset is always willing to ______|
एक विकास मानसिकता वाला व्यक्ति हमेशा ...... तैयार रहता है।

64 / 75

Category: Employability Skill CBT Paper (I)

20. Computer network that spans a regional, national or global area is called __________ |
कंप्यूटर नेटवर्क, जो एक क्षेत्रीय, राष्ट्रीय या वैश्विक क्षेत्र तक फैला होता है, उसे ............ कहा जाता है l

65 / 75

Category: Employability Skill CBT Paper (I)

21. How do successful people handle failure? |
सफल लोग असफलता को कैसे संभालते हैं?

66 / 75

Category: Employability Skill CBT Paper (I)

22. Which one of the following is a describing word?|
निम्नलिखित में से कौन-सा एक वर्णनात्मक शब्द है?

67 / 75

Category: Employability Skill CBT Paper (I)

23. 1st industrial revolution started in…..|
पहली औद्योगिक क्रांति की शुरुआत …….।

68 / 75

Category: Employability Skill CBT Paper (I)

24. What is shortcut key for “Paste” command?|
"पेस्ट" कमांड के लिए शॉर्टकट की (कुंजी) क्या है?

69 / 75

Category: Engineering Drawing CBT Paper (I)

1. Identify the line 'b'? |
लाइन 'b' को पहचानें?

70 / 75

Category: Engineering Drawing CBT Paper (I)

2. Which title block position is correct as standard practice? |
एक मानक अभ्यास के रूप में कौन सी शीर्षक ब्लॉक स्थिति सही है?

71 / 75

Category: Engineering Drawing CBT Paper (I)

3. Identify the name of tool?/
उपकरण का नाम पहचानें?

72 / 75

Category: Engineering Drawing CBT Paper (I)

4. Compass used to draw for___./
कम्पास का उपयोग ___ को ड्रा करने के लिए किया जाता है.

73 / 75

Category: Engineering Drawing CBT Paper (I)

5. Is this correct aligned system dimension?
क्या यह सही संरेखित सिस्टम आयाम है?

74 / 75

Category: Engineering Drawing CBT Paper (I)

6. Isndimension correctly marked in the circle as per standard?/
मानक के अनुसार सर्कल में क्या आयाम सही ढंग से चिह्नित है?

75 / 75

Category: Electrician First Year CBT Paper (TT)

1. Which is used for making solar cell? |
सौर सेल बनाने के लिए किसका उपयोग किया जाता है?

Your score is

The average score is 87%

0%

Exit

WhatsApp और YouTube चैनल से जुड़े रहना

Leave a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Scroll to Top