RAC Second Year CBT Paper – Set -03

/75
28

यह पेपर 2 घंटे का है 2 घंटे बाद पेपर अपने आप सबमिट हो जायेगा और आप चाहें तो 2 घंटे से पहले भी सबमिट कर सकते है|

सॉरी समय समाप्त हो गया|


Refrigeration and Air Conditioning Technician CBT Paper Second Year (Quiz -03)

इस पेपर में 75 प्रशन है जिसमे Trade Tehory  के 38 प्रशन, Workshop Calculation and Science के 06 प्रशन, Engineering Drawing के 06 प्रशन, Employability Skill  के 25 प्रशन , प्रत्येक प्रशन 2 मार्क्स का है और किसी प्रकार की नेगेटिव मार्किंग नहीं है|

1 / 75

Category: Employability Skill CBT Paper (I)

1. A wireless technology that connects a laptop to the internet is called ________ .|
एक वायरलेस तकनीक जो लैपटॉप को इंटरनेट से जोड़ती है _____ कहलाती है।

2 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

1. What is the name of part marked as X in thermostat? |
थर्मोस्टेट में X के रूप में चिह्नित भाग का नाम क्या है?

3 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

2. Which types of heat are involved in ventilation and infiltration of air to AC space? |
एसी स्पेस में वेंटिलेशन और इनफिल्टरेशन वायु को किस प्रकार की हीट शामिल किया गया है?

4 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

3. Which one indicates by pass valve in figure? |
चित्र में बाय पास वाल्व को कौन सा दर्शाता है?

5 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

4. What is the name of electrical component shown in figure use for Automobile A/C? |
ऑटोमोबाइल A/C के लिए चित्र में दिखाए गए विद्युत कंपोनेंट्स का नाम क्या है?

6 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

5. Which one indicate stopper in figure? |
चित्र में स्टॉपर को कौन सा दर्शाता है?

7 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

6. Which expansion valve’s orifice is adjusted by super heat? |
सुपर हीट द्वारा किस विस्तार वाल्व की छिद्र को समायोजित किया जाता है?

8 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

7. What is the name of part marked as X in service line of ice plant? |
बर्फ संयंत्र की सर्विस लाइन में X के रूप में चिह्नित भाग का नाम क्या है?

9 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

8. What type of acid is used with water for De-scaling of water cooled condenser? |
वाटर कूल्ड कंडेनसर की डी-स्केलिंग के लिए पानी के साथ किस प्रकार के एसिड का उपयोग किया जाता है?

10 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

9. Which valve consist of a valve seat, ring plates, valve springs and retainer? |
किस वाल्व में वाल्व सीट, रिंग प्लेट, वाल्व स्प्रिंग्स और रिटेनर होते हैं?

11 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

10. How the power consumed by the motor varies with its speed in VFD? |
VFD में मोटर द्वारा खपत की जाने वाली शक्ति किस प्रकार बदलती है?

12 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

11. Which compressor is used in the refrigeration system? |
प्रशीतन प्रणाली में किस कंप्रेसर का उपयोग किया जाता है?

13 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

12. What is the benefit of preventive maintenance in AC plant? |
एसी प्लांट में निवारक रखरखाव का क्या लाभ है?

14 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

13. Which type of air conditioners full-fills the requirement of 15 tons cooling capacities? | किस प्रकार के एयर कंडीशनर 15 टन कूलिंग क्षमता की आवश्यकता को पूरा करते हैं?

15 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

14. Which type of AC system is capable of heating or cooling in different zones simultaneously? | किस प्रकार का एसी सिस्टम एक साथ विभिन्न क्षेत्रों में गर्म या ठंडा करने में सक्षम है?

16 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

15. Which valve is first closed to start the pump down operation in central AC plant? |
सेंट्रल एसी प्लांट में पंप डाउन ऑपरेशन शुरू करने के लिए किस वाल्व को पहले बंद किया जाता है?

17 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

16. How the cooling effect is improved in cooling tower? |
कूलिंग टॉवर में शीतलन प्रभाव में सुधार कैसे होता है?

18 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

17. Which one is insulation shown in figure? |
चित्र में दिखाया गया इन्सुलेशन कौन सा है?

19 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

18. Which type of relay is marked as X in freezer wiring diagram? |
फ्रीज़र वायरिंग आरेख में किस प्रकार के रिले को X के रूप में चिह्नित किया गया है?

20 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

19. What is the advantage of variable speed pumping load control in chiller AC plant? |
चिलर एसी प्लांट में वेरिएबल स्पीड पंपिंग लोड कंट्रोल का क्या फायदा है?

21 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

20. Which part is indicated by X in figure?
आकृति में X किस भाग को दर्शाता है?

22 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

21. Which parts of cooling tower usually has a sump for cold water discharge connections? | कूलिंग टावर के किन हिस्सों में आमतौर पर ठंडे पानी के डिस्चार्ज कनेक्शन के लिए नाबदान होता है?

23 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

22. How the pH of water is checked for acidic or alkaline? |
अम्लीय या क्षारीय के लिए पानी के pH की जाँच कैसे की जाती है?

24 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

23. Which device is installed in ducts to control air flow? |
वायु प्रवाह को नियंत्रित करने के लिए नलिकाओं में कौन सा उपकरण स्थापित किया गया है?

25 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

24. What is the name of part marked as X? |
X के रूप में चिह्नित भाग का नाम क्या है?

26 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

25. Which periodic servicing requires, unit shutdown and transfer of all the food load in same capacity running unit? | किस आवधिक सर्विसिंग के लिए इकाई को बंद करना और सभी खाद्य भार को समान क्षमता वाली चालू इकाई में स्थानांतरित करना आवश्यक है?

27 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

26. Which system maintains indoor air quality by adding fresh air and conditioned air to offset heating or cooling loads? | कौन सी प्रणाली ताजी हवा और वातानुकूलित वायु को गर्म करने या ठंडा करने के भार को जोड़कर इनडोर वायु गुणवत्ता को बनाए रखती है?

28 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

27. Which compressor uses whirl vein mechanism for controlling capacity? |
कौन सा कंप्रेसर क्षमता को नियंत्रित करने के लिए व्हीर्ल वेन मैकानिज़म का उपयोग करता है?

29 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

28. What is the name of part marked as X in a fan motor? |
पंखे की मोटर में X के रूप में चिह्नित भाग का नाम क्या है?

30 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

29. Which point indicate Pre cooler zone in figure? |
चित्र में कौन सा बिंदु प्री कूलर ज़ोन को दर्शाता है?

31 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

30. Which one indicates evaporator fan in figure? |
चित्र में कौन सा ईवापोरेटर फैन को दर्शाता है?

32 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

31. What is the name of electrical component shown in figure used for Automobile A/C electronic circuit? | ऑटोमोबाइल A/C इलेक्ट्रॉनिक सर्किट के लिए प्रयुक्त चित्र में दिखाए गए विद्युत कंपोनेंट्स का नाम क्या है?

33 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

32. Which type of compressor shown in figure? |
चित्र में किस प्रकार का कम्प्रेसर दिखाया गया है?

34 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

33. Which expansion device is used in walk in coolers? |
वॉक इन कूलर में किस विस्तार उपकरण का उपयोग किया जाता है?

35 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

34. What is the name of part marked as X in AHU? |
AHU में जैसा X के रूप में चिह्नित भाग का नाम क्या है?

36 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

35. Where liquid nozzle fit in shell and tube condenser? |
शेल और ट्यूब कंडेनसर में लिक्विड नोजल कहाँ फिट होता है?

37 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

36. Which fan is used to handle the direction of air flow 90o away from the inlet? |
इनलेट से 90 o दूर वायु प्रवाह की दिशा को संभालने के लिए किस पंखे का उपयोग किया जाता है?

38 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

37. Which component checking going on in Mobile air conditioner is shown in figure? |
मोबाइल एयर कंडीशनर में कौन से कम्पोनेंट की जाँच चल रही है यह चित्र में दिखाया गया है?

39 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

38. Why the glass wool insulation is avoided in ducts? |
ग्लास ऊन इन्सुलेशन नलिकाओं में क्यों बचा जाता है?

40 / 75

Category: Employability Skill CBT Paper (II)

1. Which of the following actions in a official meeting show appropriate workplace etiquette? | किसी ऑफिशियल मीटिंग में निम्नलिखित में से कौन सा कार्य कार्यस्थल पर उचित शिष्टाचार दर्शाता है?

41 / 75

Category: Employability Skill CBT Paper (II)

2. For a project work you have collected some information from internet and sorted it. What is the best way to share it with your team? | किसी प्रोजेक्ट कार्य के लिए आपने इंटरनेट से कुछ इनफार्मेशन कलेक्ट की है और उसे क्रमबद्ध किया है। इसे अपनी टीम के साथ शेयर करने का सबसे अच्छा तरीका क्या है?

42 / 75

Category: Employability Skill CBT Paper (II)

3. Which option below describes a "gig" in the gig economy? |
नीचे दिया गया कौन सा विकल्प गिग इकॉनमी में "गिग" का वर्णन करता है?

43 / 75

Category: Employability Skill CBT Paper (II)

4. When we want to type using our voice, we are using _______ |
जब हम अपनी आवाज का उपयोग करके टाइप करना चाहते हैं, तो हम _______ का उपयोग करते हैं

44 / 75

Category: Employability Skill CBT Paper (II)

5. In a team where members have different ideas and there is a disagreement, what should be done? | एक टीम में जहां सदस्यों के विचार अलग-अलग हों और असहमति हो, तो क्या किया जाना चाहिए?

45 / 75

Category: Employability Skill CBT Paper (II)

6. If someone wants to sell home made products, what they have to do, to grow the business? |
अगर कोई घर में बने उत्पाद बेचना चाहता है तो उसे व्यवसाय बढ़ाने के लिए क्या करना होगा?

46 / 75

Category: Employability Skill CBT Paper (II)

7. Someone loves photography and dreams of starting his own photography business, he has to start with _______ | किसी को फ़ोटोग्राफ़ी पसंद है और वह अपना फ़ोटोग्राफ़ी व्यवसाय शुरू करने का सपना देखता है, तो उसे _______ से शुरुआत करनी होगी

47 / 75

Category: Employability Skill CBT Paper (II)

8. In an organisation, if all the workers are skilled and systematically working, the organisation will be ________ | किसी आर्गेनाईजेशन में, यदि सभी कर्मचारी कुशल और व्यवस्थित रूप से काम कर रहे हैं तो आर्गेनाईजेशन ________ होगा

48 / 75

Category: Employability Skill CBT Paper (II)

9. Punctuality means _______ |
समय की पाबंदी का अर्थ _______ है ।

49 / 75

Category: Employability Skill CBT Paper (II)

10. What is the process of formally introducing oneself called? |
औपचारिक रूप से अपना परिचय देने की प्रक्रिया को क्या कहते हैं?

50 / 75

Category: Employability Skill CBT Paper (II)

11. You are a trained electrician. If you want to get job in Delhi, what are the key words you use to search in job portal? |
आप एक प्रशिक्षित इलेक्ट्रिशियन हैं। यदि आप दिल्ली में नौकरी पाना चाहते हैं, तो जॉब पोर्टल में खोजने के लिए आप किन प्रमुख शब्दों का उपयोग करते हैं?

51 / 75

Category: Employability Skill CBT Paper (II)

12. While presenting your business plan to audience, how will you engage them to connect with you?|
दर्शकों के सामने अपनी व्यवसाय योजना प्रस्तुत करते समय, आप उन्हें अपने साथ कैसे जोड़ेंगे?

52 / 75

Category: Employability Skill CBT Paper (II)

13. Which app is a widely used for screen casting from your mobile phone? |
आपके मोबाइल फोन से स्क्रीन कास्टिंग के लिए कौन सा ऐप सबसे अधिक उपयोग किया जाता है?

53 / 75

Category: Employability Skill CBT Paper (II)

14. Fill up the blanks with suitable words so as to become a meaningful sentence.
There _______ a coffee shop _______ the park. |
रिक्त स्थानों को उचित शब्दों से भरें ताकि एक सार्थक वाक्य बन सके ।
There _______ a coffee shop _______ the park.

54 / 75

Category: Employability Skill CBT Paper (II)

15. Learning a new skill to do fundamentally the same nature of task is called _______ |
मूल रूप से समान प्रकृति के कार्य को करने के लिए नया कौशल सीखना _______ कहलाता है

55 / 75

Category: Employability Skill CBT Paper (II)

16. To become a gig worker, a person should find gig work opportunities by means of _______ |
एक गिग वर्कर बनने के लिए, एक व्यक्ति को _______ के माध्यम से गिग कार्य के अवसर खोजने चाहिए

56 / 75

Category: Employability Skill CBT Paper (II)

17. Which section of the Skill India Digital Platform helps users find physical training centers nearby?|
स्किल इंडिया डिजिटल प्लेटफ़ॉर्म का कौन सा सेक्शन यूजर को आस-पास के फिजिकल ट्रेनिंग सेंटर खोजने में मदद करता है?

57 / 75

Category: Employability Skill CBT Paper (II)

18. A skilled electrician searching gig work that matches his skill will find job opportunities in _______ |
एक कुशल इलेक्ट्रीशियन जो अपने कौशल से मेल खाने वाला गिग वर्क खोज रहा है, उसे _______ में नौकरी के अवसर मिलेंगे

58 / 75

Category: Employability Skill CBT Paper (II)

19. Your community wants to reduce plastic waste. How can you use design thinking to find new ideas to solve this problem? |
आपका समुदाय प्लास्टिक अपशिष्ट को कम करना चाहता है। इस समस्या को हल करने के लिए नए विचार खोजने के लिए आप डिज़ाइन थिंकिंग का उपयोग कैसे कर सकते हैं?

59 / 75

Category: Employability Skill CBT Paper (II)

20. What should you do before making a choice at work? |
कार्यस्थल पर कोई विकल्प चुनने से पहले आपको क्या करना चाहिए?

60 / 75

Category: Employability Skill CBT Paper (II)

21. In your resume, which information has less importance? |
आपके बायोडाटा में कौन सी जानकारी कम महत्व रखती है?

61 / 75

Category: Employability Skill CBT Paper (II)

22. Which one is a key skill to be used for a Market survey? |
मार्केट सर्वे के लिए उपयोग किया जाने वाला एक प्रमुख कौशल कौन सा है?

62 / 75

Category: Employability Skill CBT Paper (II)

23. When you do not know how to use a new machine, what will be your action? |
जब आप नई मशीन का उपयोग करना नहीं जानते तो आपका क्या कार्य होगा?

63 / 75

Category: Engineering Drawing CBT Paper (II)

1. Symbol shown in above image is of flow meter? |
उरोक्त चित्र में जो सिंबल दिखाया गया है क्या वो फ्लो मीटर का प्रतीक है?

64 / 75

Category: Engineering Drawing CBT Paper (II)

2. Identify the symbol. |
प्रतीक को पहचानें।

65 / 75

Category: Engineering Drawing CBT Paper (II)

3. The best shape of ducts in air conditioning is_______ |
एयर कंडीशनिंग में नलिकाओं का सबसे अच्छा आकार ____ है.

66 / 75

Category: Engineering Drawing CBT Paper (II)

4. Which of the following is the S.I. unit to measure pressure in refrigeration? |
प्रशीतन में दबाव मापने के लिए निम्न में से कौन सी SI इकाई है?

67 / 75

Category: Engineering Drawing CBT Paper (II)

5. Symbol in above image is of air dryer or not? |
उपरोक्जोत चित्र में जो सिंबल दिखाया गया है क्या वो एयर ड्रायर का प्रतीक है?

68 / 75

Category: Engineering Drawing CBT Paper (II)

6. Symbol shown in above image is of Rotary pump or not ? |
उपरोक्त चित्र में प्रदर्शित सिंबल क्या रोटरी पंप का प्रतीक है ?

69 / 75

Category: ES 2 Year Module 1- Basic Carrer Skills

1. Your team has completed a challenging project successfully. How should you celebrate the success?

70 / 75

Category: Workshop Calculation and Science CBT Paper (II)

1. Which one of the following acts in between the wheels and roads, if vehicles are able to run on roads? |
यदि वाहन सड़कों पर चलने में सक्षम हैं, तो पहियों और सड़कों के बीच में निम्न में से कौन सा कार्य करता है?

71 / 75

Category: Workshop Calculation and Science CBT Paper (II)

2. Which symbol is used to denote co-efficient of friction? |
घर्षण के गुणांक को निरूपित करने के लिए किस प्रतीक का प्रयोग किया जाता है?

72 / 75

Category: Workshop Calculation and Science CBT Paper (II)

3. What is the name of a booklet, the rates of various terms are indicated? |
कौन-सा प्राधिकरण दरों के अनुसूची को प्रकाशित करता है?

73 / 75

Category: Workshop Calculation and Science CBT Paper (II)

4. What is the formula for circumference of a circle?
वृत्त की परिधि का सूत्र क्या है?

74 / 75

Category: Workshop Calculation and Science CBT Paper (II)

5. What is the name of the structure formed, if a steel is heated for about 723oC? |
उस संरचना का नाम क्‍या है, यदि स्‍टील को 723oC पर गर्म किया जाता है?

75 / 75

Category: Workshop Calculation and Science CBT Paper (II)

6. Which one of the following geometrical shapes centre of gravity lies from its base is 1/3 of its height? | निम्नमें से कौन सा ज्यामितीय आकृति का गुरुत्वाकर्षण केंद्र इसके आधार से स्थित है, इसकी ऊँचाई 1/3 है?

Your score is

The average score is 52%

0%

Exit

WhatsApp और YouTube चैनल से जुड़े रहना

Leave a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Scroll to Top