RAC Second Year CBT Paper – Set -05

/75
24

यह पेपर 2 घंटे का है 2 घंटे बाद पेपर अपने आप सबमिट हो जायेगा और आप चाहें तो 2 घंटे से पहले भी सबमिट कर सकते है|

सॉरी समय समाप्त हो गया|


Refrigeration and Air Conditioning Technician CBT Paper Second Year (Quiz -05)

इस पेपर में 75 प्रशन है जिसमे Trade Tehory  के 38 प्रशन, Workshop Calculation and Science के 06 प्रशन, Engineering Drawing के 06 प्रशन, Employability Skill  के 25 प्रशन , प्रत्येक प्रशन 2 मार्क्स का है और किसी प्रकार की नेगेटिव मार्किंग नहीं है|

1 / 75

Category: Employability Skill CBT Paper (I)

1. What is stress? |
तनाव क्या है?

2 / 75

Category: Workshop Calculation and Science CBT Paper (I)

1. What is colour of a metal piece when heated to 250oC while doing the tempering process? | टैम्‍परिंग प्रक्रिया करते समय एक धातु के टुकड़े को 250oC पर गर्म किया जाता है, तो उस धातु के टुकड़े का रंग क्‍या होगा?

3 / 75

Category: Workshop Calculation and Science CBT Paper (II)

1. What is the centre of gravity of a sphere? | किसी गोले की गुरुत्व का केंद्र क्या है?

4 / 75

Category: Workshop Calculation and Science CBT Paper (II)

2. What is the name of the structure formed, if a steel is heated for about 723oC? |
उस संरचना का नाम क्‍या है, यदि स्‍टील को 723oC पर गर्म किया जाता है?

5 / 75

Category: Workshop Calculation and Science CBT Paper (II)

3. What is a hand book? |
पुस्तिका क्‍या है?

6 / 75

Category: Workshop Calculation and Science CBT Paper (II)

4. Which symbol is used to express change in length? |
लम्‍बाई में परिवर्तन को किस संकेत से दर्शाया जाता है?

7 / 75

Category: Workshop Calculation and Science CBT Paper (II)

5. Which force is directly proportional to the normal reaction between contacting surfaces? | कौन सा बल सीधे सतहों से संपर्क के बीच सामान्य प्रतिक्रिया के लिए आनुपातिक है?

8 / 75

Category: Engineering Drawing CBT Paper (II)

1. Symbol shown in above image is of flow meter? |
उरोक्त चित्र में जो सिंबल दिखाया गया है क्या वो फ्लो मीटर का प्रतीक है?

9 / 75

Category: Engineering Drawing CBT Paper (II)

2. How much temperature is maintained in the freezer of a refrigerator? |
रेफ्रिजरेटर के फ्रीजर में कितना तापमान बनाए रखा जाता है?

10 / 75

Category: Engineering Drawing CBT Paper (II)

3. Which of the following is the S.I. unit to measure pressure in refrigeration? |
प्रशीतन में दबाव मापने के लिए निम्न में से कौन सी SI इकाई है?

11 / 75

Category: Engineering Drawing CBT Paper (II)

4. Identify the symbol. |
प्रतीक को पहचानें।

12 / 75

Category: Engineering Drawing CBT Paper (II)

5. Symbol shown in above image is of Tubular heat exchanger or not ? |
उपरोक्त चित्र में ट्यूबलर हीट एक्सचेंजर का प्रतीक है या नहीं ?

13 / 75

Category: Engineering Drawing CBT Paper (II)

6. How much temperature is maintained in the freezer of a refrigerator? |
रेफ्रिजरेटर के फ्रीजर में कितना तापमान बनाए रखा जाता है?

14 / 75

Category: Employability Skill CBT Paper (II)

1. Full form of GPS is _______ |
GPS का फुल फॉर्म _______ है

15 / 75

Category: Employability Skill CBT Paper (II)

2. If coworkers are gossiping about another coworker what you should do? |
यदि सहकर्मी(कोवर्कर्स) किसी अन्य सहकर्मी के बारे में गॉसिप कर रहे हैं तो आपको क्या करना चाहिए?

16 / 75

Category: Employability Skill CBT Paper (II)

3. When a person joined a new company, he may be nervous using digital tablets provided at work. That time he shall ________ |जब कोई व्यक्ति किसी नई कंपनी में शामिल होता है, तो वह कार्यस्थल पर उपलब्ध कराए गए डिजिटल टैबलेट का उपयोग करने से घबरा सकता है। उस समय वह ________ .

17 / 75

Category: Employability Skill CBT Paper (II)

4. Hi, how are you, whats up, these are examples of _______ |
नमस्ते, आप कैसे हैं, क्या चल रहा है, ये _______ के उदाहरण हैं ।

18 / 75

Category: Employability Skill CBT Paper (II)

5. For a project work you have collected some information from internet and sorted it. What is the best way to share it with your team? | किसी प्रोजेक्ट कार्य के लिए आपने इंटरनेट से कुछ इनफार्मेशन कलेक्ट की है और उसे क्रमबद्ध किया है। इसे अपनी टीम के साथ शेयर करने का सबसे अच्छा तरीका क्या है?

19 / 75

Category: Employability Skill CBT Paper (II)

6. The ability to wait and stay calm ______ |
प्रतीक्षा करने और शांत रहने की क्षमता ______ है ।

20 / 75

Category: Employability Skill CBT Paper (II)

7. While working on a project with other teammates, which of these make as a good team player? | टीम के अन्य साथियों के साथ किसी प्रोजेक्ट पर काम करते समय, इनमें से कौन एक अच्छा टीम प्लेयर बनता है?

21 / 75

Category: Employability Skill CBT Paper (II)

8. Which of the following is a good work habit? |
निम्नलिखित में से कौन सी गुड वर्क हैबिट है?

22 / 75

Category: Employability Skill CBT Paper (II)

9. Someone loves photography and dreams of starting his own photography business, he has to start with _______ | किसी को फ़ोटोग्राफ़ी पसंद है और वह अपना फ़ोटोग्राफ़ी व्यवसाय शुरू करने का सपना देखता है, तो उसे _______ से शुरुआत करनी होगी

23 / 75

Category: Employability Skill CBT Paper (II)

10. A green practice involves any activity that ________ |
ग्रीन प्रैक्टिस में कोई भी गतिविधि शामिल होती है जो ________

24 / 75

Category: Employability Skill CBT Paper (II)

11. Find the Entrepreneur from the given options. |
दिए गए विकल्पों में से उद्यमी का पता लगाएं।

25 / 75

Category: Employability Skill CBT Paper (II)

12. We use Google maps to follow the _______ to reach a place. |
किसी स्थान तक पहुंचने के लिए हम _______ का फॉलो करने के लिए गूगल मैप्स का उपयोग करते हैं।

26 / 75

Category: Employability Skill CBT Paper (II)

13. What should you always remember when creating your profile on a job portal? |
जॉब पोर्टल पर अपनी प्रोफ़ाइल बनाते समय आपको हमेशा क्या याद रखना चाहिए?

27 / 75

Category: Employability Skill CBT Paper (II)

14. If you have to migrate from your place to a new city to join new job, what will you do to migrate safely? |
यदि आपको नई नौकरी के लिए अपने स्थान से किसी नए शहर में माइग्रेट करना पड़े तो सुरक्षित माइग्रेट के लिए आप क्या करेंगे?

28 / 75

Category: Employability Skill CBT Paper (II)

15. What does it mean to think like a business person? |
एक बिजनेसमैन की तरह सोचने का क्या मतलब है?

29 / 75

Category: Employability Skill CBT Paper (II)

16. Which is a good way to handle when some of your team member made a mistake? | जब आपकी टीम के किसी सदस्य ने कोई गलती की हो तो उसे संभालने का कौन सा अच्छा तरीका है?

30 / 75

Category: Employability Skill CBT Paper (II)

17. What are some resource related problems in a workplace? |
कार्यस्थल पर रिसोर्स संबंधी कुछ समस्याएं क्या हैं?

31 / 75

Category: Employability Skill CBT Paper (II)

18. Which of the following is a regular, non-app-based gig economy job opportunity? |
एक नियमित, गैर-APP आधारित गिग इकॉनमी जॉब का अवसर कौन सा है?

32 / 75

Category: Employability Skill CBT Paper (II)

19. What is required to get the feed back of your customers? |
आपके ग्राहकों का फीडबैक प्राप्त करने के लिए क्या आवश्यक है?

33 / 75

Category: Employability Skill CBT Paper (II)

20. Which one is the input device among the options? |
विकल्पों में से कौन सा इनपुट डिवाइस है?

34 / 75

Category: Employability Skill CBT Paper (II)

21. After preparing the resume, the next important step to do is _____ |
बायोडाटा तैयार करने के बाद अगला महत्वपूर्ण कदम है _____

35 / 75

Category: Employability Skill CBT Paper (II)

22. What should be avoided during an interview? |
इंटरव्यू के दौरान किन चीज़ों से बचना चाहिए?

36 / 75

Category: Employability Skill CBT Paper (II)

23. If you face a problem, which of the following entrepreneurial mindset traits would be most helpful? |
यदि आप किसी समस्या का सामना करते हैं, तो निम्नलिखित में से इंटरप्रेनुरिअल(उद्यमशीलता) माइंडसेट का कौन सा लक्षण सबसे अधिक सहायक होगा?

37 / 75

Category: Employability Skill CBT Paper (II)

24. In an organisation, if all the workers are skilled and systematically working, the organisation will be ________ | किसी आर्गेनाईजेशन में, यदि सभी कर्मचारी कुशल और व्यवस्थित रूप से काम कर रहे हैं तो आर्गेनाईजेशन ________ होगा

38 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

1. Which colour code indicates the earth wire in power supply cord? |
पावर सप्लाई कॉर्ड में अर्थ का तार किस रंग के कोड को दर्शाता है?

39 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

2. What is the purpose of evacuating the deep freezer before gas charging? |
गैस चार्ज करने से पहले डीप फ्रीजर को खाली करने का क्या उद्देश्य है?

40 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

3. How much vacuum can be achieved in refrigeration system by three stage vacuum pumps? |
तीन फेज वाले वैक्यूम पंपों द्वारा रेफ्रिजरेशन सिस्टम में कितना वैक्यूम प्राप्त किया जा सकता है?

41 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

4. What is the name of component marked X as in recycling machine? |
रीसाइक्लिंग मशीन के रूप में चिह्नित X घटक का नाम क्या है?

42 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

5. Which thickness of PUF has the least thermal conductivity? |
PUF की मोटाई किसमें सबसे कम तापीय चालकता है?

43 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

6. Which gasket comprises a mix of metallic and filler material. Generally the gasket has a metal wound outwards in a circular spiral? |
कौन सा गैस्केट धातु और भराव सामग्री का मिश्रण है। आम तौर पर गैस्केट में एक गोलाकार सर्पिल में बाहर की ओर मुड़ी हुई धातु होती है?

44 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

7. Where Cycling Clutch Orifice Tube(CCOT) system utilize a pressure switch located in the low side of the A/C system? |
साइक्लिंग क्लच ऑरिफिस ट्यूब (CCOT) सिस्टम A/C सिस्टम के निचले हिस्से में स्थित एक दबाव स्विच का उपयोग कहाँ करती है?

45 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

8. Which type of sensors help the microprocessor to actuate EEV in AC system? |
किस प्रकार के सेंसर माइक्रोप्रोसेसर को AC प्रणाली में EEV को सक्रिय करने में मदद करते हैं?

46 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

9. What is the name of part marked X in direct drive coupling of compressor and motor? |
कंप्रेसर और मोटर के डायरेक्ट ड्राइव युग्मन में X के रूप में चिह्नित भाग का नाम क्या है?

47 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

10. How the reciprocal of air density is mentioned in psychrometric chart? |
साइकोमेट्रिक चार्ट में वायु घनत्व के पारस्परिक कैसे उल्लेख किया गया है?

48 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

11. Which part is used to hold the spring in position in TEV? |
TEV में स्थिति स्प्रिंग को होल्ड रखने के लिए किस भाग का उपयोग किया जाता है?

49 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

12. Which type of short cycling is avoided by the design of blower housing in car AC? |
कार AC में ब्लोअर हाउसिंग के डिजाइन से किस प्रकार की छोटी साइकिल चलाने से बचा जाता है?

50 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

13. Which condenser combines the functions of water cooled condenser and cooling tower? |
कौन सा कंडेनसर वाटर कूल्ड कंडेनसर और कूलिंग टॉवर के कार्यों को जोड़ता है?

51 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

14. Which schedule is followed for lubricating the cooling tower fan motor in package AC? |
पैकेज AC में कूलिंग टॉवर फैन मोटर को लुब्रिकेटिंग करने के लिए कौन सी अनुसूची का पालन किया जाता है?

52 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

15. Which component of Automobile air conditioner controls the refrigerant flow by using a system of opposing pressures? |
ऑटोमोबाइल एयर कंडीशनर का कौन सा कंपोनेंट्स विपरीत दबावों की प्रणाली का उपयोग करके रेफ्रिजरेंट प्रवाह को नियंत्रित करता है?

53 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

16. What is used to control the level of liquid refrigerant in a flooded evaporator? |
फ्लोडेड वाष्पीकरण में तरल प्रशीतक के स्तर को नियंत्रित करने के लिए क्या प्रयोग किया जाता है?

54 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

17. What is the unit marked as X in cooling tower water treatment? |
कूलिंग टॉवर जल उपचार में’ X 'के रूप में चिह्नित इकाई क्या है?

55 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

18. Which part of the system the charging line of recovery machine is connected for recovery of refrigerant? |
रिकवरी मशीन की चार्जिंग लाइन का कौन सा भाग रेफ्रीजरेंट की रिकवरी के लिए जुड़ा हुआ है?

56 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

19. Which one has a hygroscopic material with sensing element which is sensitive to moisture? |
किसमें संवेदन तत्व वाला एक हाइग्रोस्कोपिक पदार्थ है जो नमी के प्रति संवेदनशील है?

57 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

20. What is the temperature range of deep freezers? |
डीप फ़्रीज़र्स की तापमान सीमा क्या है?

58 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

21. Which type of compressor parts shown in figure? |
चित्र में किस प्रकार के कम्प्रेसर भाग दिखाए गए हैं?

59 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

22. Which type of evaporator is used in split air conditioner? |
स्प्लिट एयर कंडीशनर में किस प्रकार के वाष्पीकरणक का उपयोग किया जाता है?

60 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

23. What is the ideal distance required in between the compressor pulley and electric clutch to prevent Electric clutch plate slipping in automobile air conditioning system? |
ऑटोमोबाइल एयर कंडीशनिंग सिस्टम में इलेक्ट्रिक क्लच प्लेट को फिसलने से रोकने के लिए कंप्रेसर पुली और इलेक्ट्रिक क्लच के बीच आवश्यक आदर्श दूरी क्या है?

61 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

24. What is meant by total pressure in a duct? |
एक वाहिनी में कुल दबाव का क्या मतलब है?

62 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

25. What is the name of part zoomed in? |
में ज़ूम किए गए भाग का नाम क्या है?

63 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

26. What is the name of part marked as X in open type reciprocating compressor? |
ओपन टाइप रेसिप्रोकटिंग कंप्रेसर में X 'के रूप में चिह्नित भाग का नाम क्या है?

64 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

27. What is the purpose of cooling tower in central AC plant? |
केंद्रीय एसी संयंत्र में कूलिंग टॉवर का उद्देश्य क्या है?

65 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

28. Which material is used for making air ducts in chiller AC plant? |
चिलर एसी प्लांट में वायु नलिकाएं बनाने के लिए किस सामग्री का उपयोग किया जाता है?

66 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

29. What is the periodical checking for blower belt in package AC? |
पैकेज एसी में ब्लोअर बेल्ट की समय-समय पर जाँच क्या है?

67 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

30. Which design data is used for indoor air heating in winter air conditioning? |
सर्दियों के एयर कंडीशनिंग में इनडोर वायु हीटिंग के लिए कौन सा डिज़ाइन डेटा का उपयोग किया जाता है?

68 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

31. Which meter is used for measuring quantity of water consumed? |
खपत किए गए पानी की मात्रा को मापने के लिए किस मीटर का उपयोग किया जाता है?

69 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

32. What is the name of the flux used for Galvanising iron metal soldering? |
गैल्वनाइजिंग आयरन मेटल सोल्डरिंग के लिए प्रयुक्त फ्लक्स का क्या नाम है?

70 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

33. Which type of processor control is used for safety in package air conditioner? |
पैकेज एयर कंडीशनर में सुरक्षा के लिए किस प्रकार के प्रोसेसर नियंत्रण का उपयोग किया जाता है?

71 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

34. What is the name of part marked as X in testing thermostatic expansion valve? |
थर्मोस्टेटिक विस्तार वाल्व के परीक्षण में X के रूप में चिह्नित भाग का नाम क्या है?

72 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

35. Which valve is kept closed to check the function of low pressure switch? |
निम्न दबाव स्विच के कार्य की जांच के लिए किस वाल्व को बंद रखा जाता है?

73 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

36. What is the function of a shell and tube condenser? |
शेल और ट्यूब कंडेनसर का क्या कार्य है?

74 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

37. What is the dew point depression of air if dry bulb and dew point temperatures are 36oC and 32oC respectively? |
शुष्क बल्ब और ओस बिंदु तापमान क्रमशः 36oC और 32oC होने पर हवा का ओस बिंदु तापमान क्या है?

75 / 75

Category: Refrigeration and Air Conditioning Technician Second Year CBT Paper (TT)

38. Which part of hermetic compressor, the refrigerant is charged in deep freezer? |
हेर्मेटिक कंप्रेसर का कौन सा हिस्सा, रेफ्रिजरेंट को डीप फ्रीजर में चार्ज किया जाता है?

Your score is

The average score is 46%

0%

Exit

WhatsApp और YouTube चैनल से जुड़े रहना

Leave a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Scroll to Top