Welder CBT Paper – Free Practice Set -02

/75
69

यह पेपर 2 घंटे का है 2 घंटे बाद पेपर अपने आप सबमिट हो जायेगा और आप चाहें तो 2 घंटे से पहले भी सबमिट कर सकते है| पेपर देने के लिए आपको हमारी वेबसाइट पर login करना अनिवार्य है|

सॉरी समय समाप्त हो गया|


Welder CBT Paper (Quiz - 02)

इस पेपर में 75 प्रशन है जिसमे Trade Tehory  के 38 प्रशन, Workshop Calculation and Science के 06 प्रशन, Engineering Drawing के 06 प्रशन, Employability Skill  के 25 प्रशन , प्रत्येक प्रशन 2 मार्क्स का है और किसी प्रकार की नेगेटिव मार्किंग नहीं है|

1 / 75

Category: Welder CBT Paper (TT)

1. What type of rollers are used to Steel and Hard wires? |
स्टील और हार्ड वायरों के लिए किस प्रकार के रोलर्स का उपयोग किया जाता है?

2 / 75

Category: Welder CBT Paper (TT)

2. Which is the name of the welding technique shown in the figure? |
चित्र में दर्शाई गई वेल्डिंग तकनीक का नाम क्या है?

3 / 75

Category: Welder CBT Paper (TT)

3. What is the name of the part marked as ‘X’shown in the figure? |
चित्र में दिखाए गए ‘X’ से चिह्नित भाग का नाम क्या है?

4 / 75

Category: Welder CBT Paper (TT)

4. What is the name of the part marked 'X" shown in figure? |
चित्र में दर्शाए गए 'X' चिन्हित भाग का नाम क्या है?

5 / 75

Category: Welder CBT Paper (TT)

5. What is the name of last bit of an discarded electrode? |
एक खारिज इलेक्ट्रोड के अंतिम बिट का नाम क्या है?

6 / 75

Category: Welder CBT Paper (TT)

6. Which one of the flux is used in brass welding? |
पीतल वेल्डिंग में किस फ्लक्स का उपयोग किया जाता है?

7 / 75

Category: Welder CBT Paper (TT)

7. What type of torch shown in the figure? |
चित्र में किस प्रकार की टार्च दिखाई गई है?

8 / 75

Category: Welder CBT Paper (TT)

8. Which is a resistance welding method? |
एक रेजिस्टेंस वेल्डिंग विधि कौन सी है?

9 / 75

Category: Welder CBT Paper (TT)

9. What is the melting temperature of soft soldering? |
सॉफ्ट सोल्डरिंग का पिघलने का तापमान क्या है?

10 / 75

Category: Welder CBT Paper (TT)

10. Which cast iron is soft? |
कौन सा कास्ट आयरन मुलायम होता है?

11 / 75

Category: Welder CBT Paper (TT)

11. What is the name of the part mark 'X' shown in the figure? |
चित्र में दिखाए गए भाग चिह्न 'X' का नाम क्या है?

12 / 75

Category: Welder CBT Paper (TT)

12. What is the name of part marked ‘X’ shown in the figure? |
चित्र में दिखाए गए ‘X’ चिन्हित भाग का नाम क्या है?

13 / 75

Category: Welder CBT Paper (TT)

13. What is the name of the system, if two or three cylinders are coupled with suitable device? |
यदि दो या तीन सिलेंडरों को उपयुक्त उपकरण के साथ जोड़ा जाए तो सिस्टम का नाम क्या है?

14 / 75

Category: Welder CBT Paper (TT)

14. What is name of blowpipe part ‘x’ shown in the figure? |
चित्र में दिखाए गए ब्लोपाइप भाग 'x' का नाम क्या है?

15 / 75

Category: Welder CBT Paper (TT)

15. What is the function of flux in Oxy-acetylene gas welding? |
ऑक्सी-एसिटिलीन गैस वेल्डिंग में फ्लक्स का क्या कार्य है?

16 / 75

Category: Welder CBT Paper (TT)

16. What is the name of the pressure system shown in figure? |
चित्र में दर्शाई गई दाब प्रणाली का नाम क्या है ?

17 / 75

Category: Welder CBT Paper (TT)

17. What is the name of the test shown in the figure? |
चित्र में दिखाए गए परीक्षण का नाम क्या है?

18 / 75

Category: Welder CBT Paper (TT)

18. What is the purpose of H.F. unit in TIG welding? |
TIG वेल्डिंग में H.F. इकाई का उद्देश्य क्या है?

19 / 75

Category: Welder CBT Paper (TT)

19. What is the name of the position of the fixed pipe shown in the figure? |
चित्र में दिखाए गए फिक्स्ड पाइप की स्थिति का नाम क्या है?

20 / 75

Category: Welder CBT Paper (TT)

20. What is the use of oxidising flame? |
ऑक्सीडीसिंग फ्लेम का उपयोग क्या है?

21 / 75

Category: Welder CBT Paper (TT)

21. How many types of oxy-acetylene flames are there? |
ऑक्सी-एसिटिलीन फ्लेम्स कितने प्रकार की होती हैं?

22 / 75

Category: Welder CBT Paper (TT)

22. What is the symbol of oxygen? |
ऑक्सीजन का प्रतीक क्या है?

23 / 75

Category: Welder CBT Paper (TT)

23. Which metal in welding process is subjected to “Weld decay” defect? |
वेल्डिंग प्रक्रिया में किस धातु को "वेल्ड क्षय" दोष के अधीन किया जाता है?

24 / 75

Category: Welder CBT Paper (TT)

24. Which type of tungsten electrode is suitable for welding of SS by TIG process with DC? |
टंगस्टन इलेक्ट्रोड किस प्रकार के DC के साथ TIG प्रक्रिया द्वारा एसएस की वेल्डिंग के लिए उपयुक्त है?

25 / 75

Category: Welder CBT Paper (TT)

25. Which type of welding machine converts AC to DC supply? |
किस प्रकार की वेल्डिंग मशीन एसी को डीसी आपूर्ति में परिवर्तित करती है?

26 / 75

Category: Welder CBT Paper (TT)

26. What is the name of the part marked 'X' shown in figure? |
चित्र में दर्शाए गए 'X' चिन्हित भाग का क्या नाम है?

27 / 75

Category: Welder CBT Paper (TT)

27. What is the full form of OAW? |
OAW का पूर्ण रूप क्या है?

28 / 75

Category: Welder CBT Paper (TT)

28. What is the full form of ISO? |
ISO का फुल फॉर्म क्या होता है?

29 / 75

Category: Welder CBT Paper (TT)

29. What are the positions used in SAW? |
SAW में किन पोजीशन का उपयोग किया जाता है?

30 / 75

Category: Welder CBT Paper (TT)

30. Which treatment is given to a person affected by accident on the spot? |
दुर्घटना से प्रभावित व्यक्ति को मौके पर कौन सा उपचार दिया जाता है?

31 / 75

Category: Welder CBT Paper (TT)

31. What is the NDT method using sound as a source? |
स्रोत के रूप में ध्वनि का उपयोग करते हुए NDT विधि क्या है?

32 / 75

Category: Welder CBT Paper (TT)

32. What is the name of the joint shown in the figure? |
चित्र में दिखाए गए जॉइंट का नाम क्या है?

33 / 75

Category: Welder CBT Paper (TT)

33. Which welding process enables to weld dissimilar metals? |
किस वेल्डिंग प्रक्रिया से भिन्न धातुओं को वेल्ड किया जा सकता है?

34 / 75

Category: Welder CBT Paper (TT)

34. Which term refers to the rapid cooling of a metal by immersing it in oil or water? |
कौन सा शब्द किसी धातु को तेल या पानी में डुबाकर तेजी से ठंडा करने को संदर्भित करता है?

35 / 75

Category: Welder CBT Paper (TT)

35. What is the name of the defect marked as 'X' shown in the figure? |
चित्र में दिखाए गए 'X' से चिह्नित दोष का नाम क्या है?

36 / 75

Category: Welder CBT Paper (TT)

36. What is the name of the part marked as 'X' shown in the figure? |
चित्र में दिखाए गए 'X' से चिह्नित भाग का नाम क्या है?

37 / 75

Category: Welder CBT Paper (TT)

37. Which type of welding machine converts DC to AC? |
किस प्रकार की वेल्डिंग मशीन DC को AC में परिवर्तित करती है?

38 / 75

Category: Welder CBT Paper (TT)

38. Which welding process is used for thicker plates? |
मोटी प्लेटों के लिए कौन सी वेल्डिंग प्रक्रिया का उपयोग किया जाता है?

39 / 75

Category: Workshop Calculation and Science CBT Paper (I)

1. What is the S.I unit of heat? |
ऊष्‍मा की एस.आई. इकाई क्‍या है?

40 / 75

Category: Workshop Calculation and Science CBT Paper (I)

2. How many millimetres are there in 1 inch? |
1 इंच में कितने मिलीमीटर होते हैं?

41 / 75

Category: Workshop Calculation and Science CBT Paper (I)

3. What is called mass per unit volume of a substances?|
किसी पदार्थ के द्रव्यमान प्रति इकाई आयतन को क्या कहते हैं?

42 / 75

Category: Workshop Calculation and Science CBT Paper (I)

4. What is the value for specific heat of water?/
पानी की विशिष्‍ट ऊष्‍मा का मान क्‍या है?

43 / 75

Category: Workshop Calculation and Science CBT Paper (I)

5. What is the flow of electrons in any conductor? |
किसी कंडक्‍टर में इलेक्‍ट्रॉन का प्रवाह क्‍या होता है?

44 / 75

Category: Workshop Calculation and Science CBT Paper (I)

6. Which metal contains iron as a major content?|
इनमे से किस धातु में प्रमुख सामग्री के रूप में लोहा होता है?

45 / 75

Category: Engineering Drawing CBT Paper (I)

1. Compass used to draw for___./
कम्पास का उपयोग ___ को ड्रा करने के लिए किया जाता है.

46 / 75

Category: Engineering Drawing CBT Paper (I)

2. Identify the name of tool? |
उपकरण का नाम पहचानें?

47 / 75

Category: Engineering Drawing CBT Paper (I)

3. Identify the conventional symbol of material? |
चित्र में दिखाए गए सामग्री के पारंपरिक प्रतीक का पता लगाएं?

48 / 75

Category: Engineering Drawing CBT Paper (I)

4. Is this single stroke inclined letter 'A' is correct as per IS standard? |
IS मानक के अनुसार क्या यह सिंगल स्ट्रोक वर्टिकल लेटर 'A' सही है?

49 / 75

Category: Engineering Drawing CBT Paper (I)

5. Is arrow head is correct as per standard?/
मानक के अनुसार तीर शीर्ष सही है या नहीं ?

50 / 75

Category: Engineering Drawing CBT Paper (I)

6. What is the trimmed size of A4 sheet? |
A4 शीट का ट्रिम किया हुआ आकार क्या है?

51 / 75

Category: Employability Skill CBT Paper (I)

1. In which orientation, the text is printed length wise? |
किस ओरिएंटेशन (अभिविन्यास) में, टेक्स्ट (पाठ) लंबाई वार प्रिंट (मुद्रित) होता है?

52 / 75

Category: Employability Skill CBT Paper (I)

2. For short distance, which network type should be used? |
छोटी दूरी के लिए, किस नेटवर्क प्रकार का उपयोग किया जाना चाहिए?

53 / 75

Category: Employability Skill CBT Paper (I)

3. Time management………|
समय प्रबंधन………।

54 / 75

Category: Employability Skill CBT Paper (I)

4. In “SWOT” analysis, “S” stands for ______ |
स्वॉट विश्लेषण में, "S" का अर्थ .............. है।

55 / 75

Category: Employability Skill CBT Paper (I)

5. After receiving interview call, what is the next step? |
साक्षात्कार कॉल प्राप्त करने के बाद, अगला कदम क्या है?

56 / 75

Category: Employability Skill CBT Paper (I)

6. You have greeted the customer. Choose which of the following statements you should use to complete the greeting.|
आपने ग्राहक को बधाई दी है। ग्रीटिंग को पूरा करने के लिए आपको निम्नलिखित में से किस कथन का उपयोग करना चाहिए चुनें।

57 / 75

Category: Employability Skill CBT Paper (I)

7. Which one of the following is a good office etiquette? |
निम्नलिखित में से कौन सा एक अच्छा कार्यालय शिष्टाचार है?

58 / 75

Category: Employability Skill CBT Paper (I)

8. Choose the correct response for the given question. “How have you been”? |
दिए गए प्रश्न के लिए सही उत्तर चुनिए। “How have you been”?

59 / 75

Category: Employability Skill CBT Paper (I)

9. In an email, where will you add the recipient email address whom you want to send the copy of an email? |
एक ईमेल में, आप प्राप्तकर्ता का ई-मेल एड्रेस (ईमेल का पता) कहां जोड़ेंगे, जिसे आप ईमेल की कॉपी भेजना चाहते हैं?

60 / 75

Category: Employability Skill CBT Paper (I)

10. Debit card will have how many digit numbers? |
डेबिट कार्ड में कितने अंकों की संख्या होगी?

61 / 75

Category: Employability Skill CBT Paper (I)

11. Which AI tool can explain grammar? |
कौन सा एआई टूल व्याकरण समझा सकता है?

62 / 75

Category: Employability Skill CBT Paper (I)

12. Which among these are not good manners while travelling by public transport? |
इनमें से कौन सा सार्वजनिक परिवहन से यात्रा करते समय अच्छे शिष्टाचार नहीं हैं?

63 / 75

Category: Employability Skill CBT Paper (I)

13. Gesture “Brisk and erect walking” shows ________|
"तेज और सीधा चलना" वाला हाव-भाव..................... दर्शाता है -

64 / 75

Category: Employability Skill CBT Paper (I)

14. Jobs that have become outdated in the past 5 years _____/
......... नौकरियां जो पिछले 5 वर्षों में पुरानी हो गई हैं।

65 / 75

Category: Employability Skill CBT Paper (I)

15. Which one is 3P’s of public speaking? |
पब्लिक स्पीकिंग की 3 P क्या है?

66 / 75

Category: Employability Skill CBT Paper (I)

16. In MS Excel, collection of work sheet is known as ___________ |
एमएस एक्सेल में, वर्क शीट के संग्रह को ............ के रूप में जाना जाता है l

67 / 75

Category: Employability Skill CBT Paper (I)

17. _______ tab is used to insert charts, graphs, images and page number into a word file./
____ टैब का उपयोग चार्ट, ग्राफ, इमेज और पेज नंबर को वर्ड फाइल में डालने के लिए किया जाता है।

68 / 75

Category: Employability Skill CBT Paper (I)

18. What is a shortcut key for “cut’’ command?|
"कट" कमांड के लिए एक शॉर्टकट की (कुंजी) क्या है?

69 / 75

Category: Employability Skill CBT Paper (I)

19. Re-arrange the following set of words into meaningful sentence. “teacher / school / worked / she / a / as”.|
शब्दों के निम्नलिखित सेट को सार्थक वाक्य में फिर से व्यवस्थित करें। “teacher / school / worked / she / a / as”

70 / 75

Category: Employability Skill CBT Paper (I)

20. The way money is saved, spent and invested……..|
जिस तरह से पैसा बचाया जाता है, खर्च किया जाता है और निवेश किया जाता है……..

71 / 75

Category: Employability Skill CBT Paper (I)

21. Which one is NOT a benefit of oral communication? |
मौखिक संचार (ओरल कम्युनिकेशन) का कौन सा लाभ नहीं है?

72 / 75

Category: Employability Skill CBT Paper (I)

22. Fill in the blank with comparative adjective. “Your pencil is__________ than mine” |
तुलनात्मक विशेषण के साथ रिक्त स्थान भरें। “Your pencil is__________ than mine”

73 / 75

Category: Employability Skill CBT Paper (I)

23. Which one of these phrases is not related to a telephone call? |
इनमें से कौन-सा वाक्यांश एक टेलीफोन कॉल से संबंधित नहीं है?

74 / 75

Category: Employability Skill CBT Paper (I)

24. People from all religions or no religions are treated equally means…… |
सभी धर्मों या किसी भी धर्म के लोगों के साथ समान व्यवहार नहीं किया जाता है ……सेक्युलर देश

75 / 75

Category: Employability Skill CBT Paper (I)

25. What approach is used to gain access to foreign markets and quickly promote an organizations interest? | विदेशी बाजारों तक पहुंच प्राप्त करने और संगठनों के हित को जल्दी बढ़ावा देने के लिए किस दृष्टिकोण का उपयोग किया जाता है?

Your score is

The average score is 49%

0%

Exit

WhatsApp और YouTube चैनल से जुड़े ↓

Leave a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Scroll to Top