Electronic Mechanic Second Year CBT Paper – Free Practice Set -05

0

यह पेपर 2 घंटे का है 2 घंटे बाद पेपर अपने आप सबमिट हो जायेगा और आप चाहें तो 2 घंटे से पहले भी सबमिट कर सकते है|

सॉरी समय समाप्त हो गया|


Electronic Mechanic CBT Paper Second Year (Quiz -5)

इस पेपर में 75 प्रशन है जिसमे Trade Tehory  के 44 प्रशन, Workshop Calculation and Science के 06 प्रशन, Employability Skill  के 25 प्रशन , प्रत्येक प्रशन 2 मार्क्स का है और किसी प्रकार की नेगेटिव मार्किंग नहीं है|

1 / 75

Category: Workshop Calculation and Science CBT Paper (II)

1. What is the value of a x a2 x a3 x a4 ? |
a x a2 x a3 x a4 का मान क्या है?

2 / 75

Category: Workshop Calculation and Science CBT Paper (II)

2. Which authority publishes schedule of rates? |
कौन-सा प्राधिकरण दरों के अनुसूची को प्रकाशित करता है?

3 / 75

Category: Workshop Calculation and Science CBT Paper (II)

3. What is the value of x if 13+x =20? |
यदि 13+x = 20 है तो x का मान क्या है?

4 / 75

Category: Workshop Calculation and Science CBT Paper (II)

4. What is the value of (a5)7? |
(a5)7 का मान क्या है?

5 / 75

Category: Workshop Calculation and Science CBT Paper (II)

5. What is the formula for (a-b)2? | (a-b)2 का सूत्र क्या है?

6 / 75

Category: Workshop Calculation and Science CBT Paper (II)

6. What is the formula for amx an? |
am x an के लिए फार्मूला क्या है?

7 / 75

Category: Engineering Drawing CBT Paper (II)

1. Which one is the transistor? |
ट्रांजिस्टर कौन सा है?

8 / 75

Category: Engineering Drawing CBT Paper (II)

2. Name the symbol. |
प्रतीक का नाम बताइए।

9 / 75

Category: Engineering Drawing CBT Paper (II)

3. What is represented by the following electrical symbol? |
निम्नलिखित विद्युत प्रतीक द्वारा क्या दर्शाया जाता है?

10 / 75

Category: Engineering Drawing CBT Paper (II)

4. Identify the symbol of battery. |
बैटरी के प्रतीक को पहचानें.

11 / 75

Category: Engineering Drawing CBT Paper (II)

5. Which switch symbol is this? |
यह कौन सा स्विच सिंबल है?

12 / 75

Category: Engineering Drawing CBT Paper (II)

6. Which is not a type of LED? |
एलईडी का कौन सा प्रकार नहीं है?

13 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

1. What is the disadvantage of TN display? |
ट्विस्टेड नेमैटिक डिस्प्ले का क्या नुकसान है?

14 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

2. How much data is provided by the sensors every second? |
सेंसर द्वारा हर सेकंड कितना डेटा प्रदान किया जाता है?

15 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

3. What is produced by the DC motor, interfaced with 8051 microcontroller? |
8051 माइक्रोकंट्रोलर के साथ इंटरफेस DC मोटर द्वारा क्या उत्पादित होता है?

16 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

4. Which measurement is carried out by this test shown in the figure? |
चित्र में दर्शाए गए परीक्षण द्वारा कौन सा माप किया जाता है?

17 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

5. Which relay functions whenever the current in the coil reaches an upper limit? |
जब भी कुंडल में विद्युत धारा ऊपरी सीमा तक पहुंचती है तो कौन सा रिले कार्य करता है?

18 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

6. What is the minimum delay possible using a single 8051 microcontroller timer running at 12 MHz frequency? |
12 MHz आवृत्ति पर चलने वाले एक एकल 8051 माइक्रोकंट्रोलर टाइमर का उपयोग करके क्या न्यूनतम विलंब संभव है?

19 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

7. What is the function of the part marked as ‘X’ in the electric system shown in the figure? |
विद्युत प्रणाली में ’X’ के रूप में चिह्नित भाग का कार्य क्या है?

20 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

8. What is the frequency range of switching circuit in SMPS? |
SMPS में स्विचिंग सर्किट की आवृत्ति रेंज क्या है?

21 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

9. What is the expansion of AFC? |
AFC के विस्तार क्या है?

22 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

10. Which property should a bonding element in a strain gauge must have? |
स्ट्रेन गेज में बॉन्डिंग तत्व में कौन सी विशेषता होनी चाहिए?

23 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

11. Which property should a bonding element in a strain gauge must have? |
स्ट्रेन गेज में बॉन्डिंग तत्व में कौन सी विशेषता होनी चाहिए?

24 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

12. Which storage device can store maximum amount of data? |
कौन सी स्टोरेज डिवाइस अधिकतम मात्रा में डेटा स्टोर कर सकती है?

25 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

13. Which type of power supply circuit is preferred for microprocessor controlled circuit? |
माइक्रोप्रोसेसर नियंत्रित सर्किट के लिए किस प्रकार का पावर सप्लाई सर्किट पसंद किया जाता है?

26 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

14. What is the advantage of flat plate solar collector? |
फ्लैट प्लेट सौर कलेक्टर का क्या लाभ है?

27 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

15. Which type of FM detector concept produces the frequency response characteristics curve as shown in the figure? |
किस प्रकार का FM डिटेक्टर संकल्पना चित्र में दर्शाए अनुसार आवृत्ति प्रतिक्रिया विशेषता वक्र उत्पन्न करता है?

28 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

16. What is the full form of IMEI? |
IMEI का फुल फॉर्म क्या है?

29 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

17. Which meter measures all input voltages scaled down in discrete steps to match the full count range? |
कौन सा मीटर पूर्ण गणना सीमा से मेल खाने के लिए अलग-अलग चरणों में स्केल किए गए सभी इनपुट वोल्टेज को मापता है?

30 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

18. What is the purpose of 82 Ω, resistors in the circuit shown in the figure? |
चित्र में दिखाए गए परिपथ में 82Ω, प्रतिरोधकों का उद्देश्य क्या है?

31 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

19. Which type of hot air pencil tip is used in SMD soldering as shown in the figure? |
जैसा कि चित्र में दिखाया गया है, एसएमडी सोल्डरिंग में किस प्रकार की गर्म हवा वाली पेंसिल टिप का उपयोग किया जाता है

32 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

20. Which was developed to overcome the drawback of the microprocessor? |
माइक्रोप्रोसेसर की कमी को दूर करने के लिए किसका विकास किया गया था?

33 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

21. What is the full form of RTD used as a sensor? |
सेंसर के रूप में प्रयुक्त RTD का पूर्ण रूप क्या है?

34 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

22. What is the name of the region where all the light from the source is blocked? |
उस क्षेत्र का नाम क्या है जहाँ स्रोत से आने वाला सारा प्रकाश अवरुद्ध हो जाता है?

35 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

23. What is an Email? |
ईमेल क्या है?

36 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

24. How many types of overload relays are used in circuits? |
सर्किट में कितने प्रकार के ओवरलोड रिले का उपयोग किया जाता है?

37 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

25. What is the name of the part marked as ‘X’ in the multi mode optical fiber cable shown in the figure? |
चित्र में दिखाए गए मल्टी मोड ऑप्टिकल फाइबर केबल में ‘X’ से चिह्नित भाग का नाम क्या है?

38 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

26. Which device is used in telecommunication to change bit stream into codes? |
दूरसंचार में बिट स्ट्रीम को कोड में बदलने के लिए किस उपकरण का उपयोग किया जाता है?

39 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

27. What type of transformer is used in automatic voltage stabilizer? |
स्वचालित वोल्टेज स्टेबलाइजर में किस प्रकार के ट्रांसफार्मर का उपयोग किया जाता है?

40 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

28. What is the current rating of rewirable fuse used for domestic wiring? |
घरेलू वायरिंग के लिए उपयोग किए जाने वाले पुन: उपयोग योग्य फ्यूज की करंट रेटिंग क्या है?

41 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

29. What is the function of the transistor marked as ‘X’ in the buck converter circuit shown in the figure? |
चित्र में दिखाए गए बक कनवर्टर सर्किट में ‘X’ से चिह्नित ट्रांजिस्टर का कार्य क्या है?

42 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

30. What is the bit length of upcounting timers in 8051 microcontroller? |
8051 माइक्रोकंट्रोलर में टाइमर upcounting की बिट लंबाई क्या है?

43 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

31. What is the main communication method from one PDA to another PDA? |
एक PDA से दूसरे PDA तक संचार का मुख्य तरीका क्या है?

44 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

32. What is the full form of EMS? |
EMS का पूर्ण रूप क्या है?

45 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

33. Which type of energy generation produces air pollution? |
किस प्रकार के ऊर्जा उत्पादन से वायु प्रदूषण पैदा होता है?

46 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

34. What is the name of one or more solar panels put together on a rack facing the sun in solar electric system? |
सौर विद्युत प्रणाली में सूरज का सामना कर रहे एक रैक पर एक या एक से अधिक सौर पैनलों का नाम क्या है?

47 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

35. What is the full form of OTDR? |
OTDR का पूर्ण रूप क्या है?

48 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

36. What is the name of the block marked as ‘X’ in the grid tied system shown in the figure? |
चित्र में दर्शाए गए ग्रिड-टाईड प्रणाली में ‘X’ से चिह्नित ब्लॉक का नाम क्या है?

49 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

37. What is the range of specific gravity of lead-acid battery under discharged condition? |
डिस्चार्ज स्थिति में लेड-एसिड बैटरी के विशिष्ट गुरुत्व की सीमा क्या है?

50 / 75

Category: Electronics Mechanic Second Year CBT Paper (TT)

38. What is the full form of PAL? |
PAL का पूर्ण रूप क्या है?

51 / 75

Category: Employability Skill CBT Paper (II)

1. What is the process of formally introducing oneself called? |
औपचारिक रूप से अपना परिचय देने की प्रक्रिया को क्या कहते हैं?

52 / 75

Category: Employability Skill CBT Paper (II)

2. When presenting your business plan to a potential investor, you should be clear about ________ |
किसी पोटेंशियल इन्वेस्टर के सामने अपनी बिज़नेस प्लान प्रस्तुत करते समय आपको ________ के बारे में स्पष्ट होना चाहिए

53 / 75

Category: Employability Skill CBT Paper (II)

3. If some one wants to apply bank loan for their business, their business plan should have ________ |
यदि कोई अपने बिज़नेस के लिए बैंक लोन अप्लाई करना चाहता है, तो उसकी बिज़नेस प्लान में ________ होना चाहिए

54 / 75

Category: Employability Skill CBT Paper (II)

4. __________ is a list of your qualifications, your skills and work experience. |
__________ आपकी योग्यताओं, कौशलों और कार्य अनुभव की एक सूची है।

55 / 75

Category: Employability Skill CBT Paper (II)

5. Complete the sentence with suitable describing words.
There are ________ apartments in my neighbourhood.
उपयुक्त वर्णनात्मक शब्दों से वाक्य पूरा करें ।
There are ________ apartments in my neighbourhood.

56 / 75

Category: Employability Skill CBT Paper (II)

6. How can you become as self-employed? |
आप स्व-रोज़गार कैसे बन सकते हैं?

57 / 75

Category: Employability Skill CBT Paper (II)

7. What type of resources one can find in the Skill India Digital Platform? |
स्किल इंडिया डिजिटल प्लेटफ़ॉर्म में किस प्रकार के संसाधन मिल सकते हैं?

58 / 75

Category: Employability Skill CBT Paper (II)

8. While applying for a job, how to start an email to a company? |
नौकरी के लिए आवेदन करते समय किसी कंपनी को ईमेल कैसे शुरू करें?

59 / 75

Category: Employability Skill CBT Paper (II)

9. What is called a media presentation shared over the Internet? |
इंटरनेट पर साझा की जाने वाली मीडिया प्रेजेंटेशन को क्या कहा जाता है?

60 / 75

Category: Employability Skill CBT Paper (II)

10. What is the standard way in which computers connected wireless? |
कंप्यूटरों को वायरलेस तरीके से कनेक्ट करने का मानक तरीका क्या है?

61 / 75

Category: Employability Skill CBT Paper (II)

11. During a job interview, if you couldn't hear or understand a question, what would you say? |
नौकरी के लिए इंटरव्यू के दौरान यदि आप किसी प्रश्न को सुन या समझ नहीं पाते, तो आप क्या कहेंगे?

62 / 75

Category: Employability Skill CBT Paper (II)

12. Which of the following is a good work habit? |
निम्नलिखित में से कौन सी गुड वर्क हैबिट है?

63 / 75

Category: Employability Skill CBT Paper (II)

13. The reason to reply to comments on your YouTube videos is _______ |
आपके YouTube वीडियो पर कमेन्ट्स का उत्तर देने का कारण _______ है

64 / 75

Category: Employability Skill CBT Paper (II)

14. Complete the sentence with suitable describing words | उचित वर्णनात्मक शब्दों से वाक्य पूरा करें ।
There is water scarcity in the locality. The area is ________.

65 / 75

Category: Employability Skill CBT Paper (II)

15. Plan, Prepare, Perform is related to ______ |
प्लान, प्रिपेर, परफॉर्म ______ से संबंधित है

66 / 75

Category: Employability Skill CBT Paper (II)

16. Imagine you are setting up a mobile repair shop. Which of the following is the most important for its success? |
कल्पना करें कि आप एक मोबाइल रिपेयर की शॉप खोल रहे हैं। इसकी सफलता के लिए निम्नलिखित में से कौन सा सबसे महत्वपूर्ण है?

67 / 75

Category: Employability Skill CBT Paper (II)

17. Which of the following is self-management skills? |
निम्नलिखित में से कौन सा सेल्फ-मैनेजमेंट स्किल है?

68 / 75

Category: Employability Skill CBT Paper (II)

18. Suggestion for green practices in the office canteen is ______ |
ऑफिस कैंटीन में ग्रीन प्रैक्टिस का सुझाव ______ है

69 / 75

Category: Employability Skill CBT Paper (II)

19. Your community wants to reduce plastic waste. How can you use design thinking to find new ideas to solve this problem? |
आपका समुदाय प्लास्टिक अपशिष्ट को कम करना चाहता है। इस समस्या को हल करने के लिए नए विचार खोजने के लिए आप डिज़ाइन थिंकिंग का उपयोग कैसे कर सकते हैं?

70 / 75

Category: Employability Skill CBT Paper (II)

20. What is the benefit of self-employment? |
स्वरोजगार से क्या लाभ है?

71 / 75

Category: Employability Skill CBT Paper (II)

21. Which of the following is required for teamwork? |
टीम वर्क के लिए निम्नलिखित में से क्या आवश्यक है?

72 / 75

Category: Employability Skill CBT Paper (II)

22. In a manufacturing unit, the packaging process is taking longer than usual time, causing delays in shipments. What should the workers do? |
एक विनिर्माण इकाई में, पैकेजिंग प्रक्रिया में सामान्य से अधिक समय लग रहा है, जिससे शिपमेंट में देरी हो रही है। मजदूरों को क्या करना चाहिए?

73 / 75

Category: Employability Skill CBT Paper (II)

23. The ability to wait and stay calm ______ |
प्रतीक्षा करने और शांत रहने की क्षमता ______ है ।

74 / 75

Category: Employability Skill CBT Paper (II)

24. When a person joined a new company, he may be nervous using digital tablets provided at work. That time he shall ________ |जब कोई व्यक्ति किसी नई कंपनी में शामिल होता है, तो वह कार्यस्थल पर उपलब्ध कराए गए डिजिटल टैबलेट का उपयोग करने से घबरा सकता है। उस समय वह ________ .

75 / 75

Category: Employability Skill CBT Paper (II)

25. Which among the following is not an Online payment application? |
निम्नलिखित में से कौन सा एक ऑनलाइन पेमेंट एप्लीकेशन नहीं है?

Your score is

The average score is 0%

0%

Exit

WhatsApp और YouTube चैनल से जुड़े रहना

Leave a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Scroll to Top